hueNET - hueNET Blog

hueNET Blog

hueNET

Ubiquiti USW-Industrial

Ubiquiti USW-Industrial

"Industrial" grade fanless switch with large PoE capacity * 8x gigabit 802.3bt (PoE++, 60W) ports, 2x gigabit non-PoE ports * 430W total PoE budget, completely fanless * Supports all L2 features (SNMP, STP, LAG, etc), no L3 * Has a CLI accessible over SSH. telnet 127.0.0.1 does not

Converting an mdadm RAID1 array to RAID5

Converting an mdadm RAID1 array to RAID5

PREREQUISITES 1. An existing mdadm RAID1 array with <=2 drives. If you have >2 drives in the array, read below. 2. New drives with at least the same capacity as the existing drives. In the commands below, substitute <ARRAY> with your existing mdadm array (e.g.

Magisk installed and running on a rooted Sony Xperia 1 III

Installing Magisk and rooting a Sony Xperia 1 III

-------------------------------------------------------------------------------- PREREQUISITES 1. An unlocked Xperia 1 III (guide coming soon) 2. XperiFirm ( https://forum.xda-developers.com/t/tool-xperifirm-xperia-firmware-downloader-v5-6-2.2834142/ ) 3. UnSIN ( https://forum.xda-developers.com/t/tool-unsin-sin-v3-v4-v5-unpacker-v1-13.3128106/ ) 4. Android SDK Platform Tools ( https://developer.android.com/studio/releases/platform-tools) 5. Google USB Driver (https://

A Sony Xperia 1 III

Updating a rooted Sony Xperia 1 III

If you've rooted your Xperia 1 III, you will no longer receive OTA updates. This guide will show you how to update your rooted Xperia. -------------------------------------------------------------------------------- NOTICE You may potentially lose root access after updating until you reinstall Magisk. -------------------------------------------------------------------------------- PREREQUISITES 1. XperiFirm ( https://forum.xda-developers.com/t/

A "Delete Datastore" operation failing due to an in-use dump file

Deleting a vmkdump .dumpfile on ESXi 7

Sometimes when deleting a datastore in vSphere/ESXi, you might run into an error similar to file system is busy or Device or resource busy. This is usually casued by a dump file being configured to use the datastore you are trying to delete, and is an easy fix. --------------------------------------------------------------------------------

64-bit Arch ARM happily running on my 4GB RPi 4 Model B Rev 1.4

Installing 64-bit Arch Linux on a Raspberry Pi 4 Model B Rev 1.4

PREREQUISITES 1. An >8GB disk (SD card, USB drive, etc.) 2. A Linux machine (can be a live image) with an SD card reader if using an SD card 3. A Raspberry Pi 4 Model B (only tested on revision 1.4, probably works on earlier ones too) In